Pick the group closest to your line. Each group links to the technical notes behind it.
Small labels on dense 3C boards
- Small Label Feeding on 3C SMT Lines — A 2 mm label is not a small 60 mm label. Narrow tier: 2-23 mm, one lane, one fiber sensor, multi-layer position correction, matched platform surface.
Rolled functional materials: stiffeners, Mylar, dust mesh
- Roll Feeder: More Than Just Labels — A roll feeder also runs FPC stiffeners, Mylar tape, foam and dust mesh. The roll interface is the same; tension, thickness and platform surface change.
- Labels as Components: How a Label Feeder Works — Inside one machine cycle: reel feed, push stripping, nozzle pick. The specs that decide whether a label feeder fits your placement machine.
Large labels and multi-column labels
How to choose a label feeder model
the two inputs that decide it: the placement machine, and the widest label you have to place.
What a 200 mm reel diameter means for changeover
why labels per reel is a property of your label, not of the feeder, and how to work it out.
Sheet material or reel material
Sheet label feeder or reel label feeder
when material on roll is the wrong answer.
Forward push stripping or retract stripping
which way the adhesive has to face, and how label length decides between the two bodies.
Lines with no room to spare
- Four Label Feeder Structures and When Each Fits — Reel or sheet, adhesive side up or down, placement machine or custom rig: the four structures behind LFSID-xS, LFHZXB, LFS and PLF feeders.
Changeover time, and feeder choice by machine
- Cutting Changeover Time with Feeder Setup — Changeover work splits into five groups. Loading and checking feeders on a bench before the line stops is the part that needs no new machine.
Custom station from a drawing
Inline labeling or an offline labeling station
what changes on the line, and what does not.
Wiring a label feeder into a placement machine
the yellow and green wires, standalone mode, and the power supply figure that gets misread.
- Custom Labeling Station: 12 Inputs We Need — A custom station cannot be quoted from a photo of the part. Twelve inputs decide the station count, the takt and the price.