Enter the machine group and the label size; the tool picks the published models that match and links to their model pages. Leaving a field empty means that condition is not restricted.
How to use it
Series-wide: positioning accuracy ±0.2 mm, angle accuracy ±0.5°, feeding speed 1–100 adjustable, feeding cycle 0.1–2 s, DC 24 V supply. Only models with published parameters are listed; models still under confirmation are not offered here — contact us to check.
Selection reference table
The table below lists published coverage by machine group, to be read alongside the filter results above.
| Machine group | Models | Max label width (mm) | Columns | Fits |
|---|---|---|---|---|
| FUJI label feeder | 2 | ≤ 58 | 1–1 | FUJI NXT series |
| JUKI label feeder | 2 | ≤ 98 | 1–12 | JUKI KE700 / KE2000 / FX / JX / JM series |
| PANASONIC label feeder | 3 | ≤ 98 | 1–12 | PANASONIC NPM / CM602 / CM402 |
| YAMAHA label feeder - YS series | 3 | ≤ 98 | 1–12 | YAMAHA YS series (YS24, YS12 and others) |
| YAMAHA label feeder - YV series | 3 | ≤ 98 | 1–12 | YAMAHA YV series (YV88, YV100 and others) |
| ASM D series label feeder | 3 | ≤ 98 | 1–14 | ASM D series, HS50, HS60 |
| ASM X series label feeder | 2 | ≤ 58 | 1–8 | ASM X series placement machines |
| Samsung (Hanwha) label feeder | 2 | ≤ 58 | 1–8 | SM series (320 / 321 / 411 / 411F / 421 / 431 / 471 / 481 / 482) |
| Standard label feeder - upper screen | 5 | ≤ 248 | 1–14 | Non-standard automation / custom placement machines |
| MINI label feeder | 2 | ≤ 98 | 1–8 | Non-standard placement machines and automation equipment |
| Classic label feeder | 4 | ≤ 148 | 1–12 | Reel material; non-standard labeling machines and automation equipment |
| Retract-stripping label feeder | 3 | ≤ 148 | 1–1 | Automation equipment / non-standard builds |
| Universal (UNI) label feeder | 1 | — | — | Universal UNI placement machines |
| MIRAE label feeder | 1 | — | — | MIRAE placement machines |
| Short rear-screen label feeder (SIU) | 2 | — | — | Non-standard automation / custom placement machines |
| Retract-stripping label feeder with upper peeling (HZS) | 1 | — | — | Automation equipment / non-standard builds |
| Retract-stripping label feeder, standard peeling (HZ) | 3 | — | — | Automation equipment / non-standard builds |
| Peel-and-stick tab feeder (YSDF) | 1 | — | — | Automation equipment / non-standard builds |
| Cut-to-length feeder (TCT) | 1 | — | — | Automation equipment / non-standard builds |
| Reverse-peeling label feeder (XB) | 1 | — | — | Automation equipment / non-standard builds |
| Mobile labeling module (MMD) | 1 | — | — | Automation equipment / non-standard builds |
Scope and limits
- The tool filters only models with parameters published on this site; models still under confirmation are excluded, so no result does not mean no solution.
- Results are candidate models; the final model is confirmed in writing after an engineering review.
- Enter label width at the largest outline; for multi-column material give the total width as well.
- Conditions other than machine group (feeding speed, takt, mounting space, signal interface) are outside the filter and are confirmed item by item in an engineering review.